Blog & News
Home > Blog & News > Reo Mesh: What Buyers Need to Know Before Ordering
Nov.10, 2026
Looking for a Reo Mesh manufacturer that can meet your specifications and provide evidence of raw material quality? Jizhuang Tech manufactures reinforcing mesh in different configurations and offers order-specific raw material testing, with actual testing videos and inspection reports available to customers.
Established in 2000, Jizhuang Tech supplies welded reinforcing mesh for international distributors, importers, construction contractors and project buyers. Our manufacturing services cover square mesh, rectangular mesh, trench mesh and customized mesh requirements.
For buyers, choosing a supplier should involve more than comparing prices. The steel grade, wire diameter, mesh spacing, raw material test results, production process and export arrangements all need to be checked before an order is confirmed.
This article explains the main Reo Mesh specifications, our raw material inspection service and the information buyers need when placing an order.
Jizhuang Tech manufactures different Reo Mesh configurations, including square mesh, rectangular mesh, trench mesh, UTE mesh and customized mesh. Buyers should confirm wire diameter, spacing, sheet dimensions and steel grade before ordering.
Square Reo Mesh has longitudinal and transverse wires arranged at equal spacing. It is commonly used for concrete slabs, floors, driveways and other reinforcement applications.
The following are common Australian market reference specifications:
| Mesh Type | Longitudinal Wire (mm) | Transverse Wire (mm) | Wire Spacing (mm) |
| SL62 | 6 | 6 | 200 × 200 |
| SL72 | 6.75 | 6.75 | 200 × 200 |
| SL82 | 7.6 | 7.6 | 200 × 200 |
| SL92 | 8.6 | 8.6 | 200 × 200 |
| SL102 | 9.5 | 9.5 | 200 × 200 |
| SL81 | 7.6 | 7.6 | 100 × 100 |
Rectangular Reo Mesh has different wire spacing in the two directions. It is commonly specified for concrete elements where reinforcement requirements differ between the main and cross directions.
| Mesh Type | Main Wire Diameter (mm) | Cross Wire Diameter (mm) | Main Wire Spacing (mm) | Cross Wire Spacing (mm) |
| RL718 | 6.75 | 7.6 | 100 | 200 |
| RL818 | 7.6 | 7.6 | 100 | 200 |
| RL918 | 8.6 | 7.6 | 100 | 200 |
| RL1018 | 9.5 | 7.6 | 100 | 200 |
| RL1118 | 10.7 | 7.6 | 100 | 200 |
| RL1218 | 11.9 | 7.6 | 100 | 200 |
Trench Mesh is designed for strip footings, foundation trenches and other narrow concrete reinforcement applications. Its width is selected according to the required number of longitudinal wires.
The following table shows common Australian 500L trench mesh configurations:
| Mesh Type | Longitudinal Wires | Longitudinal Wire Diameter (mm) | Cross Wire Diameter (mm) | Longitudinal Spacing (mm) | Cross Spacing (mm) | Dimensions (mm) |
| L8TM200 | 3 | 7.6 | 4 | 100 | 300 | 6000 × 200 |
| L8TM300 | 4 | 7.6 | 4 | 100 | 300 | 6000 × 300 |
| L8TM400 | 5 | 7.6 | 4 | 100 | 300 | 6000 × 400 |
| L11TM200 | 3 | 10.7 | 4.77 | 100 | 300 | 6000 × 200 |
| L11TM300 | 4 | 10.7 | 4.77 | 100 | 300 | 6000 × 300 |
| L11TM400 | 5 | 10.7 | 4.77 | 100 | 300 | 6000 × 400 |
| L12TM200 | 3 | 11.9 | 4.77 | 100 | 300 | 6000 × 200 |
| L12TM300 | 4 | 11.9 | 4.77 | 100 | 300 | 6000 × 300 |
| L12TM400 | 5 | 11.9 | 4.77 | 100 | 300 | 6000 × 400 |
UTE Mesh, also known as Utemesh, is designed for utility vehicle trays and small truck trays. It is different from conventional reinforcing mesh used in concrete slabs.
Common Australian market reference specifications include:
| Mesh Type | Longitudinal Wire Diameter (mm) | Cross Wire Diameter (mm) | Wire Spacing (mm) | Sheet Dimensions (mm) |
| SL62UTE | 6 | 6 | 200 × 200 | 4000 × 2000 |
| SL72UTE | 6.75 | 6.75 | 200 × 200 | 4000 × 2000 |
| SL82UTE | 7.6 | 7.6 | 200 × 200 | 4000 × 2000 |
If standard sizes do not match your requirements, Jizhuang Tech can review drawings and specifications for customized mesh production.
Custom options may include:
Wire diameter.
Longitudinal and transverse spacing.
Sheet length and width.
Steel grade and wire profile.
Special mesh configurations.
Bundle labels and OEM identification.
The correct steel grade must be confirmed before production. A nominal 500 MPa yield strength alone is not enough to establish compliance with AS/NZS 4671.
For Australian and New Zealand projects, buyers should check the applicable reinforcing steel requirements and the specified ductility classification.
These designations identify different reinforcing steel ductility classes within the relevant Australian and New Zealand specification framework.
When purchasing Reo Mesh, confirm:
Steel grade and ductility classification.
Yield strength.
Tensile strength and relevant tensile-to-yield requirements.
Elongation and ductility requirements.
Wire diameter and dimensional tolerances.
Applicable requirements for welded mesh.
D500L, D500N and D500E should not be treated as interchangeable simply because they share a nominal 500 MPa strength classification.
Plain and deformed ribbed wires have different surface profiles. The required profile should be stated in the purchase specification and matched to the project design.
Depending on the order requirements, buyers may request material test certificates, mechanical test results, chemical composition records and relevant product inspection documents.
Jizhuang Tech can review the required steel grade and documentation before production. Any compliance statement should be supported by the relevant material and finished-product verification.
Jizhuang Tech can arrange raw material testing for every Reo Mesh order and provide customers with actual testing videos and inspection reports according to the agreed testing scope.
For overseas buyers, this provides a way to review the material used for their order without having to visit the factory for every production run.
Depending on the order requirements, raw material inspection can cover:
Steel Grade and Material Identification
Check the material designation, available batch information, wire diameter and supporting material documents against the purchasing requirements.
Tensile Strength and Yield Strength
Tensile testing evaluates the mechanical properties of the steel wire. The test results may include yield strength, tensile strength and elongation.
Chemical Composition
Where required, chemical analysis can examine elements such as carbon, silicon, manganese, phosphorus and sulfur against the applicable steel grade requirements.
Wire Diameter
Measure the incoming wire diameter and compare it with the specified dimensions and tolerances.
We understand that buyers need more than a general statement that materials have been inspected.
For each order, we can arrange the agreed raw material inspection and provide:
Actual material testing videos.
Raw material inspection reports.
Relevant mechanical test results.
Available material identification and batch information.
The video shows the testing process, while the report records the corresponding results. Together, they help buyers review the raw material quality and maintain purchasing records.
The inspection scope should be confirmed before production. For example, tensile testing and chemical composition analysis are separate tests and should only be reported when actually performed.
Important: Raw material testing does not replace finished mesh inspection. The completed welded mesh must also be checked against the relevant order specifications and applicable product requirements.
Our production video allows buyers to see the actual manufacturing process, from wire preparation to welded mesh production.
Jizhuang Tech manufactures reinforcing mesh using production equipment configured for the required wire diameters, spacing and sheet dimensions.
Steel Wire Preparation: Prepare the material according to the confirmed specifications.
Straightening and Cutting: Straighten and cut wires to the required lengths.
Wire Feeding: Position longitudinal and transverse wires at the specified spacing.
Automatic Resistance Welding: Weld crossing wires to form the mesh structure.
Mesh Sheet Production: Complete the mesh sheets according to the required dimensions.
Finished Product Inspection: Check relevant dimensions, wire arrangement and visible product quality.
If standard mesh specifications do not meet your project requirements, we can review your drawings and assess customized production options.
Customization can include:
Wire diameter.
Longitudinal and transverse spacing.
Sheet length and width.
Steel grade and wire profile.
Special mesh configurations.
OEM labels and bundle identification.
To review your requirements, please provide:
Reo Mesh type or product reference.
Required steel grade and standard.
Wire diameters.
Mesh spacing in both directions.
Sheet dimensions.
Order quantity.
Destination port.
Technical drawings and packaging requirements, if available.
Providing these details at the enquiry stage helps us assess manufacturing feasibility and prepare a more accurate quotation.
Proper bundling, clear identification and planned container loading help buyers receive and manage their Reo Mesh orders more efficiently.
Jizhuang Tech can arrange export packaging according to the confirmed order requirements.
Mesh sheets are grouped and secured for handling and transportation. Bundle quantities, weights and identification details should follow the agreed packing plan.
Customer labels and shipping marks can be arranged for distributors, importers and OEM orders.
Loading arrangements take into account bundle dimensions, total weight and available container space. The objective is to use container capacity efficiently while supporting safe handling.
Depending on the order, shipping documents may include:
Commercial Invoice.
Packing List.
Bill of Lading.
Agreed inspection and quality documents.
For bulk orders and repeat purchases, production scheduling must be based on the actual specifications, material availability and required delivery date.
Before confirming an order, we review:
Product type and specifications.
Order quantity.
Raw material requirements.
Customization details.
Inspection and documentation requirements.
Packaging and shipping arrangements.
Standard mesh and customized mesh may require different production schedules. We recommend confirming the lead time after reviewing the complete order details.
For repeat orders, keeping approved specifications and packaging records helps reduce unnecessary confirmation work.
Jizhuang Tech combines wire mesh manufacturing, order-specific raw material testing and customized production support for international Reo Mesh buyers.
Our manufacturing and supply services include:
15000+ Tons/Year Capacity
30,000 m² manufacturing workshop.
Raw material testing arrangements for every Reo Mesh order.
Actual testing videos and inspection reports available to customers.
Customized manufacturing based on drawings and specifications.
Export packaging and container loading arrangements.
If you are sourcing Reo Mesh for wholesale, distribution or a construction project, send us your required mesh type, steel grade, wire diameter, spacing, sheet dimensions and order quantity.
You can also send your technical drawings or existing product specifications. Our team can review your requirements and discuss the raw material testing arrangements for your order.
Jizhuang Tech – Professional Wire Mesh & Security Solution Manufacturer
Website: https://www.jzwiremesh.com/reinforcing-mesh.html
Email: admin@jzwiremesh.com
Related News
